10PX Transmitter - Manual

108
Returntotableofcontents
* Tap the type to switch the
curve type.
EXP curve screen
Curve type which operates the
throttle from the neutral point to
the full brake point on a curved
curve.
Curve screen
Curve type which sets Up to 21
points between the throttle neutral
point and full brake and operates
the throttle.
VTR curve screen
Curve type which sets the switching point
between the throttle neutral point and full
brake point and operates the throttle on a
linear curve.
0%
Normal
0%
Normal
+1% ~ +100%
+1% ~ +100%
Trigger operation Trigger operation Trigger operation
-1% ~ -100%
-1% ~ -100%
Mild Mild
Servo travel Servo travel Servo travel
Brake curve
This function makes the servo operation on the brake side faster or gentler. It does not
D൵HFWWKHPD[LPXPVHUYRPRYHPHQW7KHVHOHFWLRQIURPDPRQJWKUHHNLQGVRIFXUYHV
(EXP/VTR/Curve) is also possible. If the Ratio is set to 100:0 with the trigger func-
WLRQ/LQNDJHPHQXĺ7KURWWOHPRGHWKHEUDNHVLGHZLOOQRWRSHUDWH6LQFHWKHVHWWLQJ
method of each curve is the same as the throttle (forward) side curve, please read previ-
ous page “Throttle curve”.
The brake EXP, VTR adjustment can be controlled with digital trim DT1 to DT6 or
digital dial DL1 etc. with the trim/dial select function. (Linkage menu)
Trim/Dial Setting
RACING MENU
Home screen Menu screen Racing menu screen Curve(EXP) screen
Throttle curve
When brake mixing is used,
brakes 2 and 3 are displayed.
- Cannot change the curve rate
for neutral and endpoints.