User's Manual

116
Play Engine Sounds-
Selecting this menu item plays the respective engine sounds during the
editing of this aircraft. Please note: this setting is only temporary.
That is, this setting is not retained after you exit the aircraft editor.
To select this option, click the Play Engine Sounds menu item. This
will place a check mark before the setting and return to the aircraft
editor. Additionally, the engine sounds will become audible.
Additionally, you may also press the ‘P’ key on the keyboard to enable
or disable the engine sounds.
Display Advanced Properties-
This option displays advanced properties for the components in the
airframe. Using the advanced properties you may fine-tune the physics
calculations performed by RealFlight, in order to adjust the flight
performance to your liking. When this option is checked, additional
component properties will be displayed in the property listing area of
the aircraft editor dialog. These properties are marked as “Advanced”
in the following sections.