Operation Manual

TRANSMITTER OPERATION
With the FP-4DN, a two-stick control will
operate:
1. Throttle
2. Aileron
3. Elevator
4. Rudder
With the FP-5DN, in addition to the above
mentioned operations, a snap-switch is
provided for the landing gear or other
suitable operations.
With the FP-6DN, aside from the 5 move-
ments above, an additional control (vol-
ume type control) is added on the front
panel for the 6th control (variable move-
ment).
Operating procedures for the FP-4DN, FP-
5DN, FP-6DN are the same as they are
designed and Manufactured to the same
specifications.
As an additional feature, all Futaba Propo.
Models are provided with two (2) sets of
knobs (long and short), to suit your re-
quirements. To change knobs, pull firmly
off the Black Plastic Knobs from the con-
trol sticks and replace with the spare plas-
tic knobs provided in the Kit.
A neck strap too is provided for your con-
venience.
3