Operation Manual

Sailplane Section
SPEED FLAP MIXING (SPF)—4-S
This function is used to define the following
types of speed flap mixing:
Speed flap - elevator mixing
Speed flap - aileron mixing
These mixing functions are useful for com-
pensating for flap actuation trim changes, increas-
ing the lift capability of the wing, making tighter
turns, and increasing maneuverability. The mixing
neutral position can be offset from the speed flaps
neutral position.
Activation of Speed Flap Mixing
In the Condition Menu, press the SPF key to get the
SPEED FLAP menu, as shown below.
Mixing Function
Selection
Speed flap
Elevator
Speed flap
Aileron
Return To Condition
Menu
Offset setting
Offsetting the Mixing Neutral Location
Press the R key. Then set the speed flap control to
the desired offset position and press the SET F key.
Mixing Selection
Choose from the two types of mixing as given below.
To set Speed Flap - Elevator Mixing, call up the set-
ting screen by pressing the A key. For a description of
the setting method, see page 137 following.
Speed Flap -> Aileron Mixing: use the B key to call
the setting screen. For a description of the setting
method, see page 138.
Sailplane Section, Page 136