Operation Manual

Helicopter Section

ACCELERATION

(ACC)

This mixing function is used to cancel the re-

action torque generated by sudden throttle

changes. The amount of mixing and the rudder

servo return delay can both be programmed.

Using the Acceleration Function

In the Condition Menu, press the

ACC

key to get the

ACCELER menu shown below.

Mode setting

Mixing rate setting

Delay setting

• Return to

Condition Menu

Mode selection

Activation of Acceleration Command Delay setting

Use the

key to activate mode setting, then press the Call the delay setting screen by pressing the 0 key.

ACT

INH

keys

(F and G)

activate or

inhibit

Now

set

the delay with the

rate

setting

keys F to M.

the Acceleration function. The setting range is 0 to 100%. and the initial value loaded

50%.

Mixing rate setting

To input the mixing rate, press the C key and set the Exiting

mixing rate with the rate setting keys F to M. The mix- To exit the Acceleration Mix function, use the

END

ing rate is initially set to a value of 50%, but may be set N key.

from 0 to 100% using the numeric keys.

Helicopter Section, Page 116