Operation Manual

Helicopter Section

Select the Gyro Mode

Press the

key to enter the mode selection menu.

Select the normal mode by pressing the

NOR ( F )

key.

Select the linear mode by pressing the

LIN ( G )

key.

Deactivate the function by pressing the

INH ( H )

key.

Normal mode

Select the sensitivity number by

pressing the F ( 1 ) or G ( 2 )

key.

Linear mode

Set Rudder Stick Position

Press the C key and set the rudder stick position with the numeric keys

F to M.

You may input from

100%

(initially

50%

entered). The

numeric keys input the number; ( + ) and ( - ) change the inputted value by

+/- 1, and the +/- key changes the sign.

Set EX P rate

Press

the D key and set

the

curve rate

with

the numeric

keys F to M.

The numeric keys work the same as given in the previous paragraph.

Press the

END (N) key to exit this menu.

Helicopter Section, Page 115