Operation Manual

Airplane Section

Spoiler setting: Press the

SPO Q

key to get to the

menu below.

Spoiler Activate

Spoiler Preset

Setting

To Preceding

Screen

Spoiler Mode Selection

Use the A () key to activate mode setting, then

press the

ACT

INH

keys ( F and

to activate

or inhibit the function. Press the B key and set the rate

with the numeric keys E to M . The initial spoiler preset

is 50%, but you may set it between -100 and +100%.

Return to preceding screen by pressing the Q key.

Airbrake ON/OFF Switch Definition

SW (C) is turned ON at the lower position at initial

setting. If you'd like another switch, call the switch

setting menu by pressing the SWT

key. For a de-

scription of the switch setting method, see page 37.

Caution: if the ON/OFF switch is disabled with NUL, the

Airbrake function remains on all the time.

Auto ON/OFF Airbrake Switch Definition (AUTO mode

only)

At first setting, the automatic airbrake control switch

is defined as SW (E), ON at the lower position. To change

this, call the switch setting menu by pressing the

SWT

key. For a description of the switch setting method,

seepage37.

Use the

END N

key to exit this menu.

Airplane Section, Page 92