User Manual

Common function

This setting will sound an alarm when the EXT-voltage drops dangerously low. VIB (vibration) that

vibrates the transmitter at the same time can also be set.

Method

① Select "EXT-VOLT" from the teleme-

try screen with the Jog key.

② Open the setting screen by

pressing the Jog key.

① In the EXT-VOLT screen state, select

(ALARM) from the menu with the

Jog key.

② Select the "ACT" by pressing

the + key or ‒ key.

① In the EXT-VOLT screen state, se-

lect (LIMIT) from the menu with

the Jog key.

② Select the voltage by

pressing the + key or ‒

key.

Selection range：

0.0V-70.0V

● When you want to set 5.0V, press the

+ key and ‒ key simultaneously.

① In the EXT-VOLT screen state, select

(VIB) from the menu with the Jog

key.

② Select the "TYP1-TYP3" by

pressing the + key or ‒ key.

Calling the setting screen

Alarm set

Alarm voltage set

Vibration set

● EXT-Voltage alarm set up

＋ −

TYPE 1

TYPE 2

TYPE 3

"VIB" types

If the following types are selected, the

transmitter will vibrate during the warning.

DN (down) shows than an

alarm is generated when

the voltage drops below

the set voltage.