User Manual

Common function

Use this setting to sound an alarm when the receiver battery voltage drops dangerously low. VIB

(vibration) that vibrates the transmitter at the same time can also be set.

Method

① Select "RX-BATT" from the telemetry

screen with the Jog key.

② Open the setting screen by

pressing the Jog key.

① In the RX-BATT screen state, select

(ALARM) from the menu with the

Jog key.

② Select the "ACT" by pressing

the + key or ‒ key.

① In the RX-BATT screen state, select

(LIMIT) 0.0V from the menu with

the Jog key.

② Select the voltage by pressing

the + key or ‒ key.

Selection range：

3.5V-8.4V

● When you want to set 5.0V, press the

+ key and ‒ key simultaneously.

① In the RX-BATT screen state, select

(VIB) from the menu with the Jog

key.

② Select the "TYP1-TYP3" by

pressing the + key or ‒ key.

Calling the setting screen

Alarm set

Alarm voltage set

Vibration set

● Setting receiver voltage alarm.

DN (down) shows than an

alarm is generated when

the voltage drops below

the set voltage.

＋ −

TYP 1

TYP 2

TYP 3

"VIB" types

＋ −