User Manual
76
Common function
In the initial state, the receiver voltage maximum and minimum values are displayed in the
transmitter. (Value until reset)
Display
① Select "RX-BATT" from the telemetry
screen with the Jog key.
② Open the setting screen by
pressing the Jog key.
① Select "MIN/MAX" from the RX-BATT
screen with the Jog key.
② Date reset by pressing the
Jog key for 1 second.
● A confirmation "beep"
sounds when complete.
Calling the setting screen
MIN/MAX reset
● Viewing the receiver voltage maximum and minimum values.
WARNING
Do not stare at or set the transmitter setting screen while flying.
■
Losing sight of the aircraft during flight is very dangerous.
■
When you want to check the information during flight, call the telemetry screen before flight
and have the screen checked by someone other than the operator.
Receiver voltage MAX
Receiver voltage display
Receiver voltage MIN
ŏ5HFHLYHU
→
7UDQVPLWWHU
7KHUHFHSWLRQRIWKHVLJ
QDOIURPWKHUHFHLYHUWR
WKHWUDQVPLWWHULVVKRZQ
7KLVGRHVQRWDIIHFWÁLJKW