User Manual

62
Common function
Function
Method
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
① Select the trim you want to set from the STEP item
and set the step size by pressing the + key or ‒ key.
＋ −
or
Range：1-40
Default：4
● When you want to return the
set value to the initial value,
press the + key and ‒ key si-
multaneously.
① Select the trim you want to set from the TYPE item
and set the trim type by pressing the + key or ‒
key.
＋ −
or
Range：NOR,
CNT(Besides THR),
ATL (THR)
Trim step
Trim type
Trim Type
The amount of trim change trim type can be
FKDQJHGEHWZHHQ125QRUPDO$7/DQG&17
(center) according to the trim application.
Trim Step
The amount of trim change per step can be
changed between 1 and 40 according to the aircraft
capacity and trim application.
Set it to match the application. With ordinary
● For example, when the step size is the initial value (4), trim movement from
center to end is 30 steps. If the step size is made 40, the trim moves 3 steps.
"TRIM"
Trim step
● Select the item with the
Jog key.
（Trim step rate）
TRIM
Trim reset ／ Trim step
(Common)
TRIM (Besides THR) NOR ⇔ CNT
CNT : With the center trim feature,
trim adjustments have no ef-
fect on the maximum servo
travel. This prevents the link-
ages from binding when ad-
justments are made.
THR TRIM ATL ⇔ NOR
ATL : With the ATL trim feature,
trim adjustments have no ef-
fect on the high throttle. This
prevents the linkages from
binding when adjustments
are made.
aircraft, a setting of about 2 to 10 should be fine.
,QLWLDOYDOXH