User Manual

56
Common function
① Select the "TYPE" item and
then select the model type by
pressing the + key or ‒ key.
＋ −
or
● The new model type is
displayed on the screen.
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Model type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. You need to confirm your
setting changes by pressing the jog key. If you fail to press the jog key
and see new model type on your screen, your changed are not saved.
Selection range：
AIRPLANE, HELICOPTER, GLIDER,
MULTI COPT
Model type
① Select the "SWSH" item and
then select the swash type by
pressing the + key or ‒ key.
＋ −
or
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Swash type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. You need to confirm your
setting changes by pressing the jog key. If you fail to press the jog key
and see new swash type on your screen, your changed are not saved.
Selection range：H-1, HR3,
H-3, HE3, HN3, H-2
① Select the "TAIL" item and then
select the swash type by press-
ing the + key or ‒ key.
＋ −
or
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Swash type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. When a change is cancelled
after the confirmation message is displayed, the change is not made
when moved to another setting item by Jog key.
Selection range：NORMAL,
V-TAIL
① Select the "WING" item and
then select the swash type by
pressing the + key or ‒ key.
＋ −
or
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Swash type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. When a change is cancelled
after the confirmation message is displayed, the change is not made
when moved to another setting item by Jog key.
Selection range：1AIL, 1AIL1FLP,
2AIL, 2AIL1FLP, ELEVON(Airplane),
2AIL2FLP(Glider)
Swash type（for Heli）
Tail type（for Airplane /Glider）
Wing type（for Airplane /Glider）