User Manual

Common function

① Select the COPY item and the select

the model number of the copy des-

tination by pressing the + key or ‒

key.

＋ −

Selection range：1-30

② Press the Jog key for 1 sec-

ond.

（1 second）

● Conﬁrmation message

"sure?" blinks.

③ Copy the model by pressing the

Jog key.

● A confirmation "beep"

sounds and "Complete"

is displayed on the screen

to show that copying is

complete.

For safety, a double setting system is used. When a change is cancelled after the confirmation message is

displayed, the change is not made when moved to another setting item by Jog key.

① Select the RES item and then press the Jog key

for 1 second.

（1 second）

● Conﬁrmation message "sure?" blinks.

② Date reset by pressing the Jog key.

● A confirmation "beep" sounds and

"Complete" is displayed on the screen is

complete.

For safety, a double setting system is used. When a change is cancelled after the conﬁrmation message

is displayed, the change is not made when moved to another setting item by Jog key.

Model copy

Date reset

CAUTION

Throttle Reverse

Only the throttle channel (CH3) initial setting is REV (reverse). Thoroughly check the

Hi and Low directions of the engine or motor used and be careful that they do not

suddenly run at full speed.

Even after data reset, CH3 is reversed.

MDL SEL PAGE 2

● Original data : Model type

Model name

● Copy place : Model type Model

name