User Manual

162
Multicopter
① Select the "SW" item and then select
the channel with the Jog key.
Range：1, 2, 4
② A switch is chosen by + key or -key.
＋ −
or
Range：SwA-SwD
Switch Change
① A channel is chosen by Jog
key.
Range：1, 2, 4
② Adjust the rate by moving the cur-
sor to D/R with the Jog key, switching
the dual rate switch to the direction
you want to set, moving the stick to
the left (down) or right (up) side and
pressing the + key or ‒ key.
Range：
0-140%
Default：100%
● When you want to re-
turn the set value to
the initial value, press
the + key and ‒ key
simultaneously.
Adjust the rate of each direction of the dual rate switch and stick by repeating step
① Select the "EXP" item and
then select the channel
with the Jog key.
Range：1-4
② Adjust the rate by moving the cur-
sor to EXP with the Jog key, switching
the dual rate switch to the direction
you want to set, moving the stick to
the left (down) or right (up) side and
pressing the + key or ‒ key.
Range：
-100 to +100%
Default：0%
● When you want to re-
turn the set value to
the initial value, press
the + key and ‒ key
simultaneously.
Adjust the rate of each direction of the dual rate switch and stick by repeating step
D/R
EXPO
＋
＋
−
−
● Moving to another setting item of the same
channel is possible by Jog key.
● Moving to another setting item of the same
channel is possible by Jog key.
Using the NORM
curve is helpful in a
model is controlled
at the throttle stick
whole field.
Using the SEPA
curve is helpful
in a model is con-
trolled at an upper
part from neutral
of a throttle stick.
Stick : LOW
THR : LOW
Stick : HIGH
THR : HIGH
Stick : LOW
THR : LOW
Stick : HIGH
THR : HIGH
EXPO TYPE : Throttle only
TYPE ▶ NORM TYPE ▶ SEPA