User Manual

160
Multicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
②Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
Beep sounds
When the THR stick
is set to the
specified position.
INH ⇔ ON/OFF
Switch selsction
Switch direction
Stick position
● When INH is selected, the function cannot be used. When
ON or OFF is selected, the function is activated. ON and OFF
changes are linked to the switch.
● This is a throttle stick position alarm.
When a throttle stick was besides the slow position
and a transmitter was turned on. → Alarm start
● The number in parenthesis is
the current throttle stick posi-
tion.
① Stick position is chosen by
Jog key.
② Set the throttle stick to the
position at which you want
to generate the alarm.
③ When the Jog key is held
down the alarm sounds at
that position.
Memorize the position at
which the beep is to sound.
THR Stick
Position setting
$QDODUPVLQJOHEHHSFDQEHVRXQGHGDWWKHVSHFL¿HGWKURWWOHVWLFNSRVLWLRQ
ŏ$ODUPIXQFWLRQ212))FDQEHVHWE\VZLWFK
"CNT ALM"
CNT ALM
Center alarm
(MULTICOPT)
● Select the
item with the
Jog key.
OFF