User Manual

158
Multicopter
Function
②Select "FLY MOD"
from the menu with
the Jog key.
③ Open the setting
screen by press-
ing the Jog key.
④ Select page 3
with the Jog key.
① Call the menu
screen from the
home screen by
pressing the + key
for 1 second.
Calling the setting screen
Method
（1 second）
＋
■ Type selection
Change the type by pressing the + key or ‒ key at the type selection item.
Range：PRIORITY or MATRIX
■ Type selection
Select the "RATE" item and then adjust the rate by pressing the
+ key or ‒ key.
This flight mode is used for controlling the
multi-copter connected to 6-8CH.
5-9 can be changed to a flight mode by the
chosen 2 switches. It's used in case of a controller
of a multicopter of the type to which the flight
mode can be changed.
FLY MOD
Flight mode
(MULTICOPT)
TYPE
RATE
● Select the chan-
nel used for a
flight mode.
● Select the flight
mode to change
the rate.
● When not using channel se-
lect INH. The display of ACT
is shown when active and as-
signed to a channel.
● Select the setting item
with the Jog key.
● Select the setting item
with the Jog key.
＋ −
or
＋ −
or
● 5 flight modes can be
set to PRIORITY type. 9
flight modes can be set
to MATRIX type.
● The mode change rate
of the multicopter con-
trol box (CH6 use)
Page 3
Page 1