User Manual

149
Glider
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
1AIL 2AIL1AIL1FLP 2AIL1FLP 2AIL2FLPWING TYPE
V-TAIL
V-Tail
(GLIDER)
This mixing is used with V tail aircraft that com-
bine the elevator and rudder functions.
"V-TAIL"
Activating the function
ELE2 rate
ELE4 rate
RUD2 rate
RUD4 rate
● When INH is selected, the func-
tion cannot be used. To use the
function, select ACT.
（Rate adjustment）
● Select the setting item with
the Jog key.
■ Activating the function
① Select the "MIX" item and then
select the "ACT" by pressing
the + key or ‒ key.
＋ −
or
● When you do not use a
function, set to the "INH" side.
■ Rate adjustment
＋ −
or
② Select the value item and then adjust
the mixing rate by pressing the + key or
‒ key.
Range：-100 to +100%
Default：+50%
（only ELE4 : -50%）
● When you want to return the set value to the initial value, press
the + key and ‒ key simultaneously. However, polarity does not
return.
NOTE：We recommend that setting be performed while moving the stick and checking the amount of
movement. If the amount of movement is too large, elevator and rudder operation will be compounded and the
servo travel range will be exceeded and a dead band in which the servo will not operate may be created.
V-TAIL
Elevator UP Elevator DOWN Rudder Right Rudder Left
CH2 (CH4)
(Stick mode 2)
CH4 (CH2)