User Manual

139
Helicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
The hovering throttle function trims the throttle
near the hovering point.
When the hovering throttle VR is turned
clockwise, the speed increases and when it is turned
counterclockwise, the speed decreases. Rotor
speed changes due to changes in the temperature,
humidity, and other flying conditions can be
trimmed. Adjust for the most stable rotor speed.
More precise trimming is possible by using this
function together with the hovering pitch function.
ŏ7KHRSHUDWLRQFRQGLWLRQFDQEHVHOHFWHGIURPRQO\
QRUPDORUQRUPDOLGOHXS
"HOV THR"
HOV THR
Hovering throttle
(HELICOPTER)
■ Activating the function
＋ −
or
① Select the "MIX"
item and then select
the "ON" by press-
ing the + key or ‒
key.
● When you do not use a function, set to
the "INH" side.
■ Selection of condition
＋ −
or
② Select the "MODE" item
and then select condition
by pressing the + key or ‒
key.
Range：NORM, NORM/IDL1
Default：NORM
■ VR setting
③ Select the "VR" item and then select the
"VR" by pressing the + key or ‒ key.
Range：NULL（OFF）, +VR, -VR
Default：NULL
（Memorizing the hovering throttle adjustment position）
■ Memory setting
④ Select the "RATE" item and memorize
the current trim position by pressing the
Jog key.
● When the VR is returned to the center after
memorization, the trim position returns to its
previous position.
［NOTE］If memorization is repeated at the same
position, the value is cumulated.
Hovering Throttle
Activating the function
Trim memory settting
VR setting
Selection of condition
● When "INH", the function
cannot be used. To use the
function, switch to "ON".
（Compensation amount at trim
memory）
（Actual compensation amount
including the hovering throttle
VR）
● The VR operating direction is
different depending on the
polarity.
● Select the setting item
with the Jog key.
● NORM：Only the normal condition operates
● NORM/IDL1：It operates by normal condition and
idle-up1.