User Manual

137
Helicopter
■ Activating the function
＋ −
or
① Select the "MIX"
item and then select
the "ON" by press-
ing the + key or ‒
key.
● When you do not use a function, set to
the "INH" side.
■ Selection of condition
＋ −
or
② Select the "COND" item
and selection of condition
by pressing the + key or ‒
key.
Range：NORM, IDL1/2
■ Setup of rate
＋ −
or
③
Select each function item of "HI"or
"LO" and set the rate by pressing the
+ key or ‒ key.
Range：-100 to +100%
Default(NORM)：-20%(LOW) +20%(HIGH)
Default(IDL1/2)：0%(LOW) 0%(HIGH)
● When you want to return the set value to the initial value,
press the + key and ‒ key simultaneously.
Pitch → Rudder mixing
Activating the function
Selection of condition
High side Setup of rate
Low side Setup of rate
● When not using this function,
select INH.
（present switch position ）
● Select the setting item
with the Jog key.
（Rate）