User Manual

135
Helicopter
● Pitch curve setting examples
（Normal）
（Hold）
（Idle-up1） （Idle-up2）
-100
+100
0
-50
+50
P1 P2 P3 P4 P5
%
P5= +70%
P4= +50%
P3= +6%
P2= -40%
P1= -70%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1 P2 P3 P4 P5
%
P5= +100%
P4= +50%
P3= 0%
P2= -50%
P1= -100%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1 P2 P3 P4 P5
%
P5= +40%
P4= +10%
P3= -10%
P2= -40%
P1= -70%
STICK
RATE
（The example of a setting ）
-100
+100
0
-50
+50
P1 P2 P3 P4 P5
%
P5= +40%
P4= +10%
P3= -10%
P2= -50%
P1= -80%
STICK
RATE
（The example of a setting ）
NOTE：Set the actual value of the pitch curve according to
the fuselage specifications.
■ Activating the pitch curves（ID1/2, HLD）
＋ −
or
①
Select the "MIX" item and then se-
lect the "ON" or "OFF" by pressing
the + key or ‒ key.
● For the normal condition, "---" is displayed. (Always ON)
● When you do not want to use an idle up, hold curve, set
to "INH".
Range：NOR, ID1, ID2, HLD
■ 5 point curve setting
② Select the setting item of each point (P-1 to P-5) with
the Jog key and set the travel of each point by press-
ing the + key or ‒ key.
Range：-100 to +100%
Default：
P-5: +100%
P-4: +50%
P-3: 0%
P-2: -50%
P-1: -100%
●
When you want to return the set value to
the initial value, press the + key and ‒ key
simultaneously.
Pitch curve
■ Curve copying method
①
Select the "CND" item
and switch to the curve
copy mode by pressing
the Jog key.
② Press the + key or ‒ key
and select the copy des-
tination condition.
＋ −
or
③ Copy the condition by
pressing the Jog key for
1 second.
（1 second）
＋ −
or