User Manual

133
Helicopter
● Throttle curve setting examples
（Normal） （Idle-up1） （Idle-up2）
■ Curve copying method
①
Select the "CND" item
and switch to the curve
copy mode by pressing
the Jog key.
② Press the + key or ‒ key
and select the copy des-
tination condition.
＋ −
or
③ Copy the condition by
pressing the Jog key for
1 second.
（1 second）
■ Activating the throttle curves (ID1/2)
＋ −
or
①
Select the "MIX" item and set to
"ON" or "OFF" by pressing the +
key or ‒ key.
● For the normal condition, "---" is displayed. (Always ON)
● When you do not want to use an idle up curve, set to
"INH".
Range：NOR, ID1, ID2
■ 5 point curve setting
② Select the setting item of each point (P-1 to P-5) with
the Jog key and set the travel of each point by press-
ing the + key or ‒ key.
Range：0-100%
Default：
P-5: 100%
P-4: 75%
P-3: 50%
P-2: 25%
P-1: 0%
●
When you want to return the set value to
the initial value, press the + key and ‒ key
simultaneously.
Throttle curve
0
100
50
25
75
P1 P2 P3 P4 P5
%
STICK
RATE
（The example of a setting ）
P5=100.0%
P4= 65.0%
P3= 50.0%
P2= 30.0%
P1= 0.0%
0
100
50
25
75
P1 P2 P3 P4 P5
%
P5=100.0%
P4= 75.0%
P3= 50.0%
P2= 54.0%
P1= 56.0%
STICK
RATE
（The example of a setting ）
0
100
50
25
75
P1 P2 P3 P4 P5
%
P5=100.0%
P4= 75.0%
P3= 65.0%
P2= 65.0%
P1= 67.0%
STICK
RATE
（The example of a setting ）
NOTE：Set the actual value of the throttle curve according to the fuselage
specifications.
＋ −
or