User Manual

121
Helicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
The condition switches (idle up 1/2 and throttle
hold switch) are not operative at initial setting.
Switch setting is performed in advance with the
condition select function.
ŏ,QLWLDOO\VHWWRLGOHXS6Z&FHQWHULGOHXS6Z&
GRZQWKURWWOHKROG6Z'GRZQ
"CONDIT"
CONDIT
Condition select
(Idle-up・Throttlehold)
(HELICOPTER)
■ Activating the function
＋ −
or
① Select the "INH" item of the con-
dition you want to use and set it
to "ON" or "OFF" by pressing the
+ key or ‒ key.
● Set conditions you do not want to use to "INH".
（In the case of change of a switch）
■ Switch selection
＋ −
or
② A cursor is moved to
"Switch selection" and
a switch is changed by
＋ key or − key.
Range：SwA-SwD
Default：SwC（IDLE-UP1）,
SwC（IDLE-UP2）, SwD（THR-HOLD）
■ Switch direction
＋ −
or
③ A cursor is moved to
"Switch direction" and
a switch direction is
changed by ＋ key or −
key.
Range：
● 2P SW：NULL, UP, DOWN
● 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
Condition select
Idle-up
setting
Throttlehold
setting
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch.
● Select the setting item
with the Jog key.
（Activating thefunction） （Switch direction ）
（Switch selection ）