User Manual

105
Airplane
■ Switch selection
③ Select the "SW" item and then select
the switch by pressing the + key or ‒
key.
＋ −
or
Range：SwA-SwD
Default：SwA
■ Switch direction
④ Select the "POSI" by pressing the + key or ‒ key at
the ON direction selection item.
＋ −
or
Range：
● 2P SW：NULL, UP, DOWN
● 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
■ Cut Position rate
⑤ Select the "RATE" item and then select
the cht position by pressing the + key or
‒ key (motor stop).
＋ −
or
● It adjusts to the position where an engine
is cut.
Range：-30 to +30%
Default：0%
● When you want to return the set value
to the initial value, press the + key and ‒
key simultaneously.
■ Function Throttle Position
⑥ Select the "THR" item and then select the position
by THR stick is lowered and Jog key is pressed for 1
second.
● Set to a safe low throttle position.
Range：0-100%
Default：15%
Throttle Cut
THR stick
middle-high
(Besides the low)
THR stick
Low
Low→High
Motor Stop
Motor Stop
Cut switch OFF
ON
OFF
Start
Cut switch
OFF
ON
OFF
Engine
stop
THR stick Low
(It's possible to do
positional change.）
(It's possible to do
positional change.）
Cut switch ON
Cut switch OFF
ON
OFF
Cut switch ON
ON
OFF
ON
OFF
THR CHT
THR Active
THR stick Low
(It's possible to do
positional change.）
Release
THR CHT
Release
NOR MODE（Engine） ESC MODE（Motor）