User guide
41
Direct Mode Functions
(EXP2 curve)
The EXP2 curve can also be set for the forward side. The brake side is the EXP curve.
1) When you want to increase
the servo sensitivity, pull the
throttle trigger to the forward
side and adjust with
the + key. When you
want to decrease the
servo sensitivity, push the
throttle trigger to the forward
side and adjust with the - key.
Setting range; -100~0~+100%
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
2) When you want to change the
curve switching point relative
to the throttle trigger, call the
point change screen by
pressing the SELECT key.
3) Adjust the switching point
with the + and - keys.
Setting range; 20~80%
- Return to the initial value (50%)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
4) When you want to increase
the brake side servo sensitiv-
ity, push the throttle trigger to
the brake side and adjust with
the + key. When you
want to decrease the
brake side servo sen-
sitivity, push the throttle trig-
ger to the brake side and ad-
just with the - key.
Setting range; -100~0~+100%
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
TG.P=50%
(full high)
(neutral)
(quick)
Servo movement
(mild)
Throttle trigger
forward side
TG.P=20%
(quick)
(mild)
TG.P=80%
(quick)
(mild)
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM