Manual

ManualsBrandsFutaba ManualsAccessories communication14MZ

AIRBRAKE

ELEVATOR

ELEVATOR 2

V-TAIL

ELEVATOR

ELEVATOR 2

AILEVATOR

●Return to Model Menu

Airbrake to ELE

[Corresponding model type]: Airplane/glider, general

This mixing is used when you want to mix

the elevators with airbrake (spoiler) operation. It

raises the elevators to correct for drooping of the

nose during airbrake operation.

*This function does not operate when airbrake is not assigned

at the Function menu in the Linkage Menu.

● The Rate 1 side/Rate 2 side mixing rate with the

elevator servos can be adjusted.

● A mixing curve can be set.

● Mixing during ﬂ ight can be turned ON/OFF by

setting a switch. (Always ON at NULL setting)

● The mixing rate can be ﬁ ne-tuned by setting a VR.

● Touch the [Airbrake to ELE] button in the Model Menu

to call the setup screen shown below.

● Mixing curve setting

(For a description of the curve setting method, see the

description at the back of this manual.)

● Fine tuning VR setting

●Curve display mode switching

(Single/Fine tuning/All Cond.)

● Left/right overall

adjustment by

Rate A and Rate B

Setting method

● Touch the "INH" button and set the function to ACT

(ON).

● When setting a switch, touch the [NULL] button

to call the <Switch> screen, and then select the

switch and set its ON direction. (Always ON at

"NULL" setting)

(For a description of the switch selection method,

see the description at the back of this manual.)

● When setting a VR, touch the Fine tuning "NULL"

button to call the <Switch> screen, and then

select the VR. The adjustment rate and direction

can be set.The VR operation mode can also be

set.

(For a description of the ﬁ ne tuning VR setting

method, see the description at the back of this

manual.)

● A mixing curve can be set.

(For a description of the curve setting method,

see the description at the back of this manual.)

● The curve display mode can be set.

●Group/single mode switch (Gr./Sngl)

(For more information, see the description at the back of this manual.)

Single : Displays the mixing curve only

Fine tuning : Displays the adjustment rate of the

ﬁ ne tuning VR

All Cond. : Displays the mixing curve of all the

conditions. (When conditions are set)