Users Manual

7
Number
Functions
1
VGA Mpx (VGA) digital camera lens
2
Internal Speaker
3
Touch screen 10.1’’
4
2.0Mpx digital camera lens
5
Cover of Mirco SD card slot
6
Volume control buttons
7
Power on/off button
8
Mirco USB port
9
Headphone port mini jack 3.5mm
10
Mirco HDMI Slot
7. Before the first start
7.1 Installation of the memory card.
To insert the memory card correctly, turn off the device, pry
the cover with your fingernail and remove it gently, insert the
microSD card into the slot as shown in the illustrations next to
the slot. Then carefully insert and close the cover.
7.2 Charging the battery
Charge the battery before the first use. The battery should be
charged by the attached charger or another charger, intended
for this type of equipment. If in doubt contact the seller or
manufacturer service.
Use only chargers and wires recommended by the
manufacturer. Using incompatible chargers or cables can
cause explosion of the battery or damage to your device.
When the battery is near a complete discharge, the notification
is displayed on a low battery charge. To continue use of the
device charge the battery.
Incorrect charger connection (USB cable) can cause
damage to the AC adapter or the device. The damages