Instruction Manual

Tools Needed
• Electric drill
• Drill bit (size varies based on surface material)
• Appropriate saw or utility knife to cut surface material
• Phillips screwdriver
• Wire strippers
• 16 AWG (1.3 through 1.5 mm
2
) marine-grade, fully-tinned copper speaker wire
You can purchase this wire from your Fusion
®
or Garmin
®
dealer:
◦ 010-12899-00: 7.62 m (25 ft.)
◦ 010-12899-10: 15.24 m (50 ft.)
◦ 010-12899-20: 100m (328 ft.)
• 20 AWG (0.5 through 0.75 mm
2
) marine-grade, fully-tinned copper wire for the RGB LED connections (sports
models only).
• 4 mm male and female bullet connectors for the LED wires (recommended, sports models only)
• Crimping tool
• Electrical tape
• Marine sealant (optional)
NOTE: For customized installations, additional tools and materials may be needed.
2 XS Series Installation Instructions