Owner's Manual

The MS-BT1 00 can be secured by either using the adhesive backing tape
or by using a 6 gauge, pan head, self tapping, non-corrosive screw.
Please ensure
that the mounting surface is flat clean and dry prior to
applying the adhesive backing tape. The surface can
be cleaned with an
alcohol swab.
When mouting using the screw hole, ensure that the surface is flat and
tightening the screw does not distort the case.
ALTERNATIVE MOUNTING :
REMOVE LINER ON ADHESIVE PAD
AND STICK UNIT TO BULKHEA >---"""'7
DRIL PILOT HOLt---~