User Guide

FLM0013i/06.20 | Issue02 Page 2 of 2
Fig.1 Fig.3Fig.2 Fig.4
FIRE RATED DOWNLIGHT 5.5W
LED FRD & Accessories
Fitting Instructions
FFRDCC / FFRDWHWW / FFRDWHCW / FFRDSNWW / FFRDSNCW
FFRDCC ONLY
- CCT COLOUR SELECT FUNCTION
• CCT colour select function (WW/CW/DL)
• Lumen output: 450lm (3000K) WW
500lm (4000K) CW
500lm (6000K) DL
To change the colour temperature, switch off the mains supply.
Carefully remove the Twist & Lock bezel from the fitting to reveal
the CCT switch (see Fig.3). Move the switch to your desired colour
temperature, then refit the bezel.
Switch the power back on, the downlight is now ready for use.
CHANGING THE BEZELS
FFRDCC To fit the bezel, align the locking teeth,
then push and twist.
To remove the bezel, simply twist and pull.
FFRDWHWW
FFRDWHCW
FFRDSNWW
FFRDSNCW
To fit the bezel, push and fit into place.
To remove the bezel, simply pull and
un-clip from the trim.
FLM0013i_5.5W-FR-Downlight_Instructions.indd 2FLM0013i_5.5W-FR-Downlight_Instructions.indd 2 29/05/2020 06:1829/05/2020 06:18