Specifications

ManualsBrandsFUSION ManualsMarineMarine Stereo

Important Safety and Product Information

WARNING

Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury.

Marine Operation Warnings

• You are responsible for the safe and prudent operation of your vessel. This device is a tool that will enhance

your capability to operate your vessel. This device does not relieve you from the responsibility of safely operating

your vessel. Avoid navigational hazards and never leave the helm unattended.

• Use this device only as a navigational aid. Do not attempt to use the device for any purpose requiring precise

measurement of direction, distance, location, or topography.

• Always be prepared to promptly regain control of the vessel. Use caution near hazards in the water, such as

docks, pilings and other vessels.

• If the device has navigating capabilities, when navigating, carefully compare information displayed on the device

to all available navigation sources, including information from visual sightings, local waterway rules and

restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing navigation.

Hearing Damage Warning

Listening to the stereo at high volume can cause damage to your hearing.

Product Environmental Programs

Information about the Garmin

product recycling program and WEEE, RoHS, REACH, and other compliance programs

can be found at garmin.com/aboutGarmin/environment.

Declaration of Conformity

Hereby, Garmin declares that this product is in compliance with the Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address: garmin.com/compliance.

UK Declaration of Conformity

Hereby, Garmin declares that this product is in compliance with the relevant statutory requirements. The full text of

the declaration of conformity is available at the following internet address: garmin.com/compliance.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause

harmful interference to radio communications if not installed and used in accordance with the instructions.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin

service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void

your warranty and your authority to operate this device under Part 15 regulations.

Innovation, Science and Economic Development Canada Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Radio Frequency Radiation Exposure

This device is a mobile transmitter and receiver that uses an internal antenna to send and receive low levels of radio

frequency (RF) energy for data communications. The device emits RF energy below the published limits when

operating in its maximum output power mode and when used with Garmin authorized accessories. To comply with

RF exposure compliance requirements, the device should be installed and operated with a minimum of 20 cm

(7.87 in.) between the device and your body. The device should not be used in other configurations. This device

must not be co-located or operated in conjunction with any other transmitter or antenna.

Software License Agreement

BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING

SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.

Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device

(the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and

intellectual property rights in and to the Software remain in Garmin and/or its third-party providers.

You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under

the United States of America copyright laws and international copyright treaties. You further acknowledge that the

structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets

of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret

of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble,

reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works

based on the Software. You agree not to export or re-export the Software to any country in violation of the export

control laws of the United States of America or the export control laws of any other applicable country.

Limited 3-Year Marine Consumer Warranty

Garmin New Zealand Limited, trading as Fusion

Entertainment (‘Fusion’), warrants that this Fusion Marine product

is free from defects in material and workmanship, according to the following terms and conditions:

• The limited warranty for the Fusion product purchased extends to 36 months beginning on the date of purchase

of the product.

• The limited warranty extends only to consumers who purchase the product in one of the countries (or areas) set

forth on garmin.com/compliance. The limited warranty is only valid in Fusion’s intended country (or area) of sale

of the product.

• During the limited warranty period, Fusion or its authorised service network will repair or replace (at Fusion’s

discretion), any defective product or parts thereof with new and return the product to the consumer in working

condition. No charge will be made to the consumer for either parts or labour in repairing or replacing the product.

All replaced parts and cosmetic parts should be free of defects at the time of shipment and, therefore shall not be

covered under these limited warranty terms.

• Repaired product will be warranted for the balance of the original warranty period or for ninety (90) days from the

date of repair, whichever is longer.

• All warranty claims must be accompanied with a copy of this warranty card, and a copy of proof of purchase.

The consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are

applicable:

• The product has been subject to: abnormal use, abnormal conditions, improper storage, unauthorised

modifications, unauthorised connections, unauthorised repair including but not limited to use of unauthorised

spare parts in repairs, misuse, neglect, abuse, accident, alteration, improper installation, acts of God, spill of

foods or liquids, maladjustment of customer controls or other acts which are beyond the reasonable control of

Fusion, including deficiencies in consumable parts such as fuses, and breakage or damage to antennae unless

caused directly by defects in materials or workmanship, and normal wear and tear of the product.

• Fusion was not notified by the consumer of the alleged defect or malfunction of the product during the applicable

limited warranty period.

• The product serial number or the accessory date code has been removed, defaced or altered.

• The product was used with or connected to an accessory not supplied by Fusion or fit for use with Fusion

product, or used in a manner other than its intended use.

If a problem develops during the limited warranty period, the consumer should take the following step-by-step

procedure:

The consumer shall return the product to any authorised Fusion dealer in authorised sales countries for repair or

replacement processing. Fusion assumes no freight or shipping responsibility for returning goods to an

authorised Fusion dealer, or return freight from an authorised dealer to the consumer submitting the warranty

claim.

The consumer shall be charged for any parts or labour charges not covered by this limited warranty. The

consumer shall be responsible for expenses related to removal and reinstallation of the product.