FUSION Apollo™ MS-WB670 Quick Start Manual D R A FT ® ® ENGLISH FUSIONENTERTAINMENT.
Getting Started Status LEDs WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. The Apollo WB670 wired remote control is an optional accessory for compatible FUSION stereos. To help you understand how the Apollo WB670 remote control works, this manual contains instructions for using the Apollo WB670 remote control with the Apollo MS-RA670 stereo.
Dial • Turn to adjust the volume. • Turn to move through the menus or adjust a setting. • Press to make a selection. • Press to turn on the remote control. • Press to mute and un-mute the audio. • Press and hold to turn off the remote control and stereo. • Press to open the menu. • Press to return to the previous screen from the menu. • Press and hold to exit the menu. • Press to tune to the previous station. • Press to skip to the beginning of the track or to the previous track.
Media Player Connection CAUTION Always disconnect your media player from the stereo when not in use and do not leave it in your vessel. This helps reduce the risk of theft and damage from extreme temperatures. Do not remove the media player or use your stereo in a distracting manner while operating the vessel. Check and obey all marine laws in association with use. The stereo accepts a variety of media players, including smartphones and other mobile devices.
NOTE: On some Bluetooth devices, adjusting the volume on the device affects the volume level on the stereo. If the remote control cannot find the stereo, the status LED turns on red briefly and then turns off. Connecting to a Garmin Watch FUSION-Link Wireless Remote Control App For more information about the watch, see the watch manual at www.garmin.com /manuals. 1 Following the instructions in the watch manual, install the FUSION-Link Lite™ app from the Connect IQ™ store onto the watch.
3 Select or to tune to the station. TIP: You can quickly save the selected station or channel as a preset by holding . Changing the Radio Station 1 Select an applicable source, such as FM. 2 Select repeatedly to move through the tuning modes, and select an option: Scanning for DAB Stations D R Before you can scan for DAB stations, you must connect a compatible DAB module and antenna (not included) to the stereo.
4 If necessary, launch a music application on the USB device, and begin playback. You can use the stereo controls to select, play, pause, and skip tracks. Controlling Music Playback on a Connected Smartphone or Media Player 1 Connect a compatible smartphone or media player to the stereo using USB or A FT Bluetooth (if available). 2 Select the appropriate source on the stereo. 3 Launch a music application on the connected smartphone or media player, and begin playback.
FUSION SUPPORT 09 369 2900 1300 736 012 +44 (0) 370 850 1244 623 580 9000 +64 9 369 2900 D R A FT New Zealand Australia Europe USA Pacific Garmin , the Garmin logo, FUSION , and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. FUSION-Link™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. ® ® Apple is a trademark of Apple Inc., registered in the U.S.
