Owner's Manual

Tools Needed
• Drill and 3 mm (
1
/
8
in.) drill bit (or a drill bit appropriate for your provided mounting hardware and mounting-
surface material).
• Screwdrivers:
◦ 5 mm (
7
/
32
in.) flat (slotted)
◦ 4 mm (
5
/
32
in.) flat (slotted)
◦ #2 Phillips
◦ #0 Phillips
• Wire cutter
• Wire stripper
• Wires and cables:
◦ 4 AWG (21 through 25 mm
2
) marine-grade, fully-tinned copper wire for power and ground
NOTE: You may need larger-diameter (smaller gauge number) wire for longer runs to account for voltage
drop (Connecting to Power, page 8)
◦ 12 AWG (3 through 4 mm
2
) marine-grade, fully-tinned copper wire for speakers
You can purchase this wire from your Fusion or Garmin
®
dealer.
◦ 010-12898-00: 7.62 m (25 ft.)
◦ 010-12898-10: 15.24 m (50 ft.)
NOTE: You may need larger-diameter (smaller gauge number) wire for longer runs of speaker wire.
◦ 20 AWG (0.5 through 0.75 mm
2
) marine-grade, fully-tinned copper wire for the remote-on signal
◦ 1-channel RCA cable (Signal and Speaker Connection Considerations, page 9)
You can purchase a suitable length of RCA cable at garmin.com/apollo_amplifier_accessories or from
your Fusion or Garmin dealer.
• Cable ties (optional)
2 Fusion Apollo MS-AP12000 Monoblock Amplifier Installation Instructions Installation Instructions