Datasheet

Sales/Technical Support
%
0845 370 4709
38
Cabinets & Enclosures
A
B
FUSION BAYING KIT
Used to join cabinets together. Please note that side panels
must be removed in order to join the cabinets.
FUSION CASTORS (4) PART NO. T70-2435
FUSION FEET (4) PART NO. T70-2434
BAYING KIT PART NO. T70-2563
3U 150 PAIR RECCESSED FRAME PART NO. T70-0007
3U 150 PAIR FLAT FRAME PART NO. T70-0008
FUSION CAGE NUTS & CAB SNAPS
A) Fusion Cab Snaps Available in Pkts of 100
Supplied in blocks of three – the Cab Snap can be pushed into the
cabinet profile, leaving two 5mm nutserts and saving the hassle
of using conventional cage nuts.
B) Fusion Cage Nut Sets M6 x 16mm
Supplied in pkts of 50 and 100 zinc plated or in black.
A) (BLOCK OF 3) PKT 100 SNAPS PART NO. T70-2451
B) ZINC PKT 50 CAGED NUT SET PART NO. T70-2366
B) ZINC PKT 100 CAGED NUT SET PART NO. T70-2367
B) BLACK PKT 100 CAGED NUT SET PART NO. T70-2508
FUSION CABLE RINGS
70mm x 70mm `Jumper’ Rings, designed for vertical
management on 800mm Floor Cabinets – Black finish.
65mm x 45mm 1U Rings designed to give extra management
on all Floor and Wall Cabinets – Black finish.
FUSION VERTICAL CABLE SUPPORT
70 X 70MM JUMPER RINGS PART NO. T70-2412
65 X 15MM JUMPER RINGS PART NO. T70-2428
VERTICAL CABLE SUPPORT PART NO. T70-2370
FUSION CASTORS / FEET
Heavy duty Castors supplied in sets of four,
2 locking and 2 non-locking. Assembled cabinets
are delivered on standard castors. For installation
we recommend heavy duty castors or feet.
Adjustable height feet supplied in sets of four.
FUSION SUB-RACK
Designed to fit any standard 19” cabinet or rack - this
Sub-Rack is available either recessed or flat. Horizontal and
vertical versions are also available.
Compatible with Fusion disconnection modules.
The Vertical Cable Support provides additional control for patch leads
running vertically in the rack. This simple metal bracket is fitted
under the end of a 1U panel.
A Velcro cable strap is supplied to secure cables.