Datasheet

All Fusion patch panels...
i
nclude Self-Adhesive Label Strips, optional
Rear Cable Management Bar & clear Labelling
New to the range...
Fusion 6c Panel
24 PORT 1U CAT 5E PATCH PANEL
Optional rear cable management bar available.
Each panel is supplied with 4 pc cage nuts, tie wrap and labelling strip
24 PORT 1U CAT 5E PATCH PANEL
PART NO. T70-2171
1U REAR CABLE MANAGEMENT BAR
PART NO.T70-2182
24 PORT 1U CAT 5E RIGHT ANGLE PATCH PANEL
c/w Large integral Cable Management
Each panel is supplied with 4 pc cage nuts, tie wrap and labelling strips
24 PORT RIGHT ANGLE PATCH PANEL
PART NO. T70-2173
16 PORT 1U CAT 5E PATCH PANEL
Optional rear cable management bar available.
Each panel is supplied with 4 pc cage nuts, tie wrap and labelling strips
16 PORT 1U CAT 5E PATCH PANEL
PART NO. T70-2170
1U REAR CABLE MANAGEMENT BAR
PART NO. T70-2182
7Structured Cabling & Copper Systems
email: [e-mail] www.fusiondatacom.com
FUSION PUNCH DOWN TOOLS
Inserts and crops wires simultaneously. Complete with extraction tool and
stop clips. Supplied in Fusion Red - Genuine Krone™ limited edition.
KRONE™ INSERTION TOOL 2A
PART NO. T70-2520
FUSION WORK TRAY
An invaluable aid when punching down panels at the rack. The work tray is
fitted to the front face of the rack. A non-slip rubber surface protects the
front of the patch panel which can be placed face-down on the tray allowing
w
ork to be carried out with the minimum of inconvenience.
WORK TRAY
PART NO. T70-2371