Datasheet

Sales/Technical Support
☎
0845 370 4709
34 Cabinets & Enclosures
A
B
FUSION BAYING KITS
U
sed to join cabinets together. Please note that side panels
must be removed in order to join the cabinets.
FUSION CASTORS (4) PART NO. T70-2435
F
USION FEET (4) PART NO. T70-2434
BAYING KITS PART NO. T70-2563
3U 150 PAIR RECCESSED FRAME PART NO. T70-0007
3U 150 PAIR FLAT FRAME PART NO. T70-0008
FUSION CAGE NUTS & CAB SNAPS
A) Fusion Cab Snaps Available in Pkts of 100
S
upplied in blocks of three – the Cab Snap can be pushed into the
cabinet profile, leaving two 5mm nutserts and saving the hassle
of using conventional cage nuts.
B) Fusion Cage Nut Sets M6 x 16mm
Supplied in pkts of 50 and 100 zinc plated or in black.
A) (BLOCK OF 3) PKT 100 SNAPS PART NO. T70-2451
B) ZINC PKT 50 CAGED NUT SET PART NO. T70-2366
B
) ZINC PKT 100 CAGED NUT SET PART NO. T70-2367
B) BLACK PKT 100 CAGED NUT SET PART NO. T70-2508
FUSION CABLE RINGS
70mm x 70mm `Jumper’ Rings, designed for vertical
management on 800mm Floor Cabinets – Black finish.
65mm x 45mm 1U Rings designed to give extra management
on all Floor and Wall Cabinets – Black finish.
FUSION VERTICAL CABLE SUPPORT
70 X 70MM JUMPER RINGS PART NO. T70-2412
65 X 15MM JUMPER RINGS PART NO. T70-2428
VERTICAL CABLE SUPPORT PART NO. T70-2370
The Vertical Cable Support provides additional control for patch leads
running vertically in the rack. This simple metal bracket is fitted
under the end of a 1U panel.
A Velcro cable strap is supplied to secure cables.
FUSION CASTORS / FEET
Heavy duty Castors supplied in sets of four,
2 locking and 2 non-locking. Assembled cabinets
are delivered on standard castors. For installation
w
e recommend heavy duty castors or feet.
Adjustable height feet supplied in sets of four.
FUSION SUB-RACK
Designed to fit any standard 19” cabinet or rack - this
Sub-Rack is available either recessed or flat. Horizontal and
vertical versions are also available.
Compatible with Fusion disconnection modules.