Operator's Manual

4. INSTALLATION
4-16
L/L Digit Select the number of digits to show after the
decimal point for minute of latitude and longi-
tude from [3digit] or [4digit].
[4digit]
Without Checksum • [Enable]: Receive NMEA 0183 sentences
with and without checksums.
• [Disable]: Do not receive NMEA 0183 sen-
tences that do not have checksums.
[Disable]
I/O Port • [Port1]: Select baud rate setting from
[4800] or [38400] according to the equip-
ment connected.
• [SIO Monitor]: Monitor the SIO input signal.
For serviceman.
[4800]
Sensor Out • [ON]: Share sensor signal, dimmer control-
ler and time data in the daisy chain. Use for
pattern 1 daisy chain (see pages 4-10 and
4-11).
• [OFF]: Share dimmer controller and time
data in the daisy chain. Use for pattern 2
daisy chain (see page 4-12).
[ON]
LCD RESET For serviceman.
SIM Turn the simulation mode on or off. [OFF]
Service RESET For serviceman.
Menu Description Default