Operator's Manual

4. INSTALLATION

4-6

2) Fix the DS-605 with four M10 bolts (dockyard supply).

3) Apply silicon rubber to M10 bolts as shown below.

2. Connect the power cable and the sensor signal cable to the RD-50 through the

cable glands for the DS-605.

1) Process the power cable and the sensor signal cable referring to the illustra-

tion below.

340 (13.39”)

Fixing holes

4-ø12

310 ± 0.5 (12.20”)

62 (2.44”)

176 ± 0.5 (6.93”)

Cable gland

Note: Mount the unit so the cable

glands are down.

Apply silicon rubber.

Seal washer

Nut

M10 bolt

Vinyl sheath

80 (for TB3)

Armor

Shield

Fold back and wrap internal shield and

fix it by cable clamp.

Vinyl tape

Armor

Vinyl sheath

Fix armor by cable clamp.

Vinyl sheath

Vinyl tape

130

DPYCY-1.5

TTYCYS-1