Operator's Manual

2. MENU
2-19
3. Press S or T key to select [Unit] and press the ENT key.
Display options
4. Press S or T key to select [DISP1 (2, 3, 4 or 5)], for which you preset the units
of measurement, and press the ENT key.
Unit options
5. Press S or T key to select [Speed], [Distance], [Depth], [Wind Speed] or [Water
TEMP] then press the ENT key.
Speed, Distance, Depth, Wind Speed, Water TEMP options
6. Press S or T key to select each unit and press the ENT key.
7. Press the DISP key to close the menu.
Speed Distance
Depth
Wind Speed
Water TEMP