Operator's Manual

2. MENU
2-9
1. Press the MENU/ESC key to open the menu.
2. Press S or T key to select [Scale Set Up] and press the ENT key.
3. Press S or T key to select [Speed Graphic] and press the ENT key.
Display options
4. Press S or T key to select [DISP1 (2, 3, 4 or 5)], which shows the speed graphic
screen, and press the ENT key.
Speed Graphic Range options
5. Press S or T key to select [Astern SPD Scale] or [Ahead SPD Scale] then press
the ENT key.
[Astern SPD Scale]: Set the astern range. (The scale is red.)
[Ahead SPD Scale]: Set the ahead range. (The scale is gray.)
Astern (Ahead) SPD Scale options
6. Press S or T key to select a range and press the ENT key.
Note: You can not set the total range of astern scale and ahead scale more than
70 kn.
7. Repeat steps 5 and 6 to set the astern range or the ahead range.
8. Press the DISP key to close the menu.