Operator's Manual

3. INSTALLATION

3.1 Equipment List

Standard supply

Optional supply

*: See the Packing lists.

3.2 Installation of Remote Display

Mounting considerations

The remote display can be installed on a desktop, on the overhead, or flush mounted in a panel.

When you select a mounting location, keep in mind the following points:

• The nominal viewing distance for the display unit is 2.0 m. Select a suitable mounting location

considering that distance.

• Locate the unit away from exhaust pipes and vents.

• Locate the unit out of direct sunlight.

• Select an installation location that is well ventilated.

• Mount the unit where shock and vibration are minimal.

• Locate the unit away from equipment which generates the electromagnetic fields like a motor

or generator.

• Allow enough maintenance space at the sides and rear of the unit. Leave enough slack in ca-

bles to facilitate maintenance and servicing.

• Observe the compass safe distances (see page ii) to prevent interference to a magnetic com-

pass.

Name Type Code No. Qty Remarks

Remote Display RD-20 - 1

Installation Materials CP26-01001* 001-076-460-00 1

Accessories FP26-00301* 001-076-470-00 1

Spare Parts SP26-00101* 001-076-450-00 1

Name Type Code No. Remarks

Remote Controller RD-501 - Including CP26-01101*

Dimmer Controller RD-502 - Including CP26-01201*

Hanger OP26-1* 000-016-195-00