Operator's Manual

1. OPERATION
9
• Heading: True (default, display indication: none), Magnetic (display indication: "MAG")
• Course over the ground: True (default, display indication: none), Magnetic (display indica-
tion: "MAG")
• Depth: AUTO (default), DBK, DBT, DBS
In the [AUTO] mode, the highest priority data is DBK and the lowest is DBS. "A" appears
after the display mode when the [AUTO] mode is active.
• Engine/shaft revolution: Select [ENGINE] or [SHAFT] from the user menu. The screen
shows "ENGINE" or "SHAFT" depending on your selection.
• Propeller pitch: Select [PITCH] from the user menu. "PITCH" appears on the screen.
• Wind speed: Theoretical (default, display indication: "T"), Relative (display indication: "R")
• Wind direction: Theoretical (default, display indication: "T"), Relative (When the wind blows
from the port, "PORT" is displayed. When the wind blows from the starboard, "STBD" is dis-
played. When the wind direction is 0.0 or 180.0 degrees, there is no indication of "PORT"
nor "STBD".)
135.4
HDG
MAG
deg
Display mode
(No indication: True,
MAG: Magnetic)
30.9
COG
MAG
deg
Display mode
(No indication: True,
MAG: Magnetic)
198.5
DEPTH
DBK
A
ft
“A” means AUTO mode.
Display mode
(DBK: Depth below keel,
DBT: Depth below transducer,
DBS: Depth below surface)
150
ENGINE
+
RPM
3
Display mode
(ENGINE or SHAFT)
Revolution per minute
36
PITCH
+
2
Display mode
%
3.1
WIND
T
kn
SPD
Display mode
(T: Theoretical,
R: Relative)
84.5
WIND
T
deg
DIR
Display mode
(T: Theoretical,
PORT/STBD/no indication: Relative)