Installation Instructions

3. INITIAL SETTINGS
3-32
3.13 AUTO OPTION Menu
.
Item Description Settings
[ADVANCED
AUTO]
The AUTO mode will maintain a set course, but
your vessel's course may be shifted by the
effects of tide and wind. To compensate for the
effects of tide and wind, set [ADVANCED AUTO]
to [ON]. Your NAVpilot must be connected to a
GPS navigator which outputs position data (Lati-
tude and Longitude) in CAN bus or NMEA 0183
format.
[OFF], [ON]
[NET TOW-
ING AUTO]
When a boat is towing fishing gear its stern is
"dragged" by the net. This causes the boat to
stray from its intended course. To keep the boat
on course, you need to adjust the trim manually,
which can be bothersome. If you do not want to
be bothered with trim adjustments, you can
enable the automatic towing function to have the
trim automatically adjusted. This feature is useful
for trawlers and purse seiners.
Not available for “boat type” “sailboat”.
Note: [NET TOWING AUTO] is not shown in
case of Fantum Feedback
TM
.
[OFF], [ON]
[CSE AFTER
REMOTE]
Select the course to follow after a remote control-
ler is operated. See the figure below.
Note: [CSE AFTER REMOTE] is not shown in
case of Fantum Feedback
TM
.
[PREVIOUS COURSE],
[PRESENT COURSE]
AUTO OPTION
ADVANCED AUTO: ON
NET TOWING AUTO*: OFF
CSE AFTER REMOTE:
PRESENT COURSE
*: Not shown when BOAT TYPE is set
for “sailboat”.
AUTO OPTION
ADVANCED AUTO: ON
For Fantum Feedback
TM
Other than Fantum Feedback
TM