Installation Instructions

3. INITIAL SETTINGS
3-21
1) Push the knob.
2) Rotate the knob to select character then push the knob.
3) The cursor moves to the next character. Repeat step 2 to change the character.
You can select the input location with the W and X keys.
3. Rotate the knob to select [OUTPUT FMT] then push the knob.
4. Rotate the knob to select the output format of the equipment then
push the knob.
5. Rotate the knob to select [BAUDRATE] then push the knob.
6. Rotate the knob to select the baud rate of the equipment then push the
knob.
7. Rotate the knob to select the [SELECT OUTPUT SENTENCE] then push the knob.
One of the following displays appears depending on the NMEA output format
selected.
8. To turn a sentence ON or OFF, rotate the knob to select the sentence, push the knob,
rotate the knob to select [ON] or [OFF] then push the knob.
9. Press the MENU key to return to the [NMEA0183 PORT1] menu.
10.Rotate the knob to select [INCOMING NMEA0183 DATA] then push the knob.
This display shows the NMEA0183 sentences currently being received.
11.Press the MENU key twice to return to the [NMEA0183 PORT SETUP] menu.
If you have equipment connected to NMEA0183 PORT2, set up the equipment similar
to how you set up the equipment in NMEA0183 PORT1.
Note: [PORT2] is not shown when [BOAT TYPE] is set to [VOLVO EVC BOAT].
NMEA0183 V1.5
NMEA0183 V2.0
NMEA0183 V3.0
4800BPS
38400BPS
VER 3.0
DBT: OFF
GLL: OFF
HDT: OFF
RMB: OFF
RSA: OFF
ZDA: OFF
DPT: OFF
GNS: OFF
MTW: OFF
RMC: OFF
VHW: OFF
GGA: OFF
HDG: OFF
MWV: OFF
ROT: OFF
VTG: OFF
DBT: OFF
HDM: OFF
RMB: OFF
VHW: OFF
VWT: OFF
GLL: OFF
MTW: OFF
ROT: OFF
VWR: OFF
GGA: OFF
HDT: OFF
RMC: OFF
VTG: OFF
ZDA: OFF
VER 1.5
DBT: OFF
GLL: OFF
MTW: OFF
RMC: OFF
VHW: OFF
GGA: OFF
HDT: OFF
RMB: OFF
RSA: OFF
VDA: OFF
DPT: OFF
HDG: OFF
MWV: OFF
ROT: OFF
VTG: OFF
VER 2.0
*
*
*: Turn OFF the sentence “RSA” in case of Fantum Feedback
TM
.
AAM
APB
BOD
BWC
BWR
HDG
HDM
HDT
MTW
MWV
DBT
DPT
GGA
GLL
GNS
INCOMING NMEA0183 DATA
RMB
RMC
ROT
THS
TLL
VHW
VTG
VWR
VWT
XTE
ZDA