Installation Instructions

3-1
3. INITIAL SETTINGS
Note: For initial settings of the NAVpilot-711C, see the operator’s manual (OME-72780).
3.1 About Initial Settings, Menu Operation
This chapter shows you how to enter initial settings, on the [INSTALLATION] menu. The
menu contains some items that may not apply to your system. To return to the [INSTAL-
LATION] menu, push the MENU key.
Minimally, the settings on the following menu must be done:
• [SHIP’S CHARACTERISTICS] menu
• [DOCKSIDE SETUP] menu
Note: The [DOCKSIDE SETUP] menu is not shown when [BOAT TYPE] is set to [VOLVO
EVC BOAT].
All operations on the menu are done with the Course control knob and MENU key
Control, key Usage
Course control knob Rotate the knob to select a menu item then push the knob.
Rotate the knob to select setting or enter alphanumeric value
then push the knob to confirm setting. This manual refers to the
Course control knob as “knob”.
MENU key Go to previous screen.
Course control knob
(pictured: NAVpilot-700)