Installation Instructions

80 ±0.5 mm(3.15” ±0.02”)
51.5 mm(2.03”)
94 ±0.5 mm(3.70” ±0.02”)
45 ±0.5 mm(1.77” ±0.02”)
44.6
±0.5 mm
(1.76” ±0.02”)
60 ±0.5 mm(2.36”±0.02”)
Cut out shaded area only
Drill hole of 3.5 mm(0.14”)
in dia.
Pilot hole for 3×20 mm
self-tapping screw.
Control Unit FAP-7011
Surface Mount Template
96 ±0.5 mm(3.78” ±0.02”)
φ
90 (3.54”) +2
-0 mm