Cut out shaded area only
Drill hole of 10mm(0.39”) in dia.
228 ±0.5 mm(8.98” ±0.02”)
218 ±1 mm(8.58” ±0.04”)
Pilot hole for 3×20mm self-tapping screw.
113 ±1 mm(4.45” ±0.04”)
60 ±0.5 mm(2.36” ±0.02”)
103 mm(4.06”)
208 mm(8.19”)
Control Unit FAP-7001
Flush Mount Template
