Operator's Manual

3. SETTINGS
3-14
8. Select [7 User Priority].
Note 1: The default priority order is Ethernet > Data1 > Data2 > Data4. Ethernet
has the top priority.
Note 2: When the heading data is input from CAN, CAN has the top priority.
9. Enter the priority for heading data by port number. For example, to set the priority
order as Data1, Data4, Data2, enter 1, 4, 2.
10. Move the cursor to [Enter] then press the ENT key.
11. Set the input data for [2 Ext. STW/COG/SOG] (external speed through water/
course over ground/speed over ground), [3 Ext. CUR] (external current), [4 Ext.
DEPTH] (external water depth) and [5 Ext. Wind] (external true wind speed and
angle) as well. Set these menus when the external input is available.
Note: [CAN] is available only for [HDG].
12. Press the MENU ESC key to close the main menu.
3.9.4 Line monitor log
Line monitor
1. Press the MENU ESC key to open the main menu.
2. Select [5 I/O] then [7 Line Monitor].