Brochure

Control Unit
RCU-024
3.3 kg 7.3 lb
Trackball Control Unit
RCU-026
1.5 kg 3.3 lb
Processor Unit
EC-3000
14 kg 30.9 lb
Switching Hub
HUB-100
1.5 kg 3.31 lb
Intelligent Hub
HUB-3000
1.5 kg 3.31 lb
270 10.63"
255 10.03"
242 9.53"
115 4.53"
162 6.38"
15 0.59"
145 5.71"
45
1.77"
47 1.85"
4-ø5
Fixing Hole
Sensor Adapter
Serial
MC-3000S
1.5 kg 3.3 lb
Analog
MC-3010A
0.8 kg 1.8 lb
Digital In
MC-3020D
0.8 kg 1.76 lb
Digital Out
MC-3030D
0.8 kg 1.76 lb
Monitor Unit
MU-190 8.8 kg 19.4 lb MU-231 12.8 kg 28.2 lb
450 17.7"
110 4.3"
389 15.3"
397 15.6"
448 17.6"
489 19.3"
4-Ø18
Cutout for ush mount
471 18.5"
554 21.8"
592 23.3"
112
4.4"
484.9 19"
553 21.8"
Cutout for ush mount
IMO ECDIS Model Course 1.27
(Generic ECDIS training)
FURUNO INSTC
NavSkills™ facilities
FURUNO’s provision of thoroughgoing ECDIS training programs
Proper training is required to ensure an efcient and safe operation of vessels as well as to
optimize the advantages of having ECDIS onboard. Advantages include less time spent on chart
management and voyage planning and increased safety through the proper setup and operation of
the ECDIS, which can remarkably reduce the risk of groundings, etc. Training comes in many
forms and the crew should undergo both generic training to get full understanding of the ECDIS as
a concept, the rules governing ECDIS and the inuences on the bridge operation. Crews should
also receive type specic ECDIS training, which helps the operator familiarize themselves with the
specic ECDIS onboard the vessel. FURUNO offers the ECDIS trainings through its INS Training
Centers (INSTC in Copenhagen and Singapore) as well as other training facilities signed up as
NavSkills™ training facilities. NavSkills™ training solution is the service and support for maritime
training centers and shipowners, who are looking to establish their own training facilities in full
compliance with STCW and IMO standards. NavSkills™ training package includes provision of
training simulators, provision and update on course materials and curriculum, training for
instructors, certication of the trainees by INSTC and much more.
STCW requires that all masters and ofcers in charge of a navigational watch (Ofcer of the
Watch: OOW) on a ship tted with ECDIS shall have completed a generic ECDIS course and
hold an ECDIS certicate in accordance with IMO model course 1.27.
This ECDIS training provides the trainees with knowledge of the ECDIS as a system,
its operation, electronic chart materials and practical navigation. Also, the course includes
terms and conditions for implementing paperless navigation. The training course focuses upon
many advantages and safety features obtained by operating ECDIS. The limitations of ECDIS
are taught throughout this training course.
This training concludes with 3 compulsory tests, and, if passed, a certicate is issued, which
conrms the trainees' successful completion of the generic ECDIS training in accordance with
IMO Model Course 1.27, reviewed by DNV SeaSkill™.
The course is available at INSTC Denmark.
Type specic ECDIS training course
FURUNO type specic ECDIS training provides trainees with specic knowledge about
functionality and effective use of FURUNO ECDIS for navigation.
The training covers the following aspects of FURUNO ECDIS operation:
• Familiarisation with available functions • familiarisation with the menu structure
• Display setup • Setting safety value • Route planning • Route monitoring
• Recognition of alarm and malfunction indicators and the actions to be taken
• Changing over to backup systems • Loading and updating of charts and licenses
• Updating software
The training concludes with a compulsory test. Upon successful completion of the test, the
navigators are issued a certicate that conrms the successful completion of the FURUNO
type specic ECDIS training course. This training complies with the STCW and ISM Codes,
audited and certied by ClassNK (only for INSTC Denmark and INSTC Singapore).
The course is available at INSTC Denmark, INSTC Singapore, FURUNO Deutschland GmbH,
OCEAN TRAINING CENTER (Turkey) and GMC Maritime Training Center (Greece).
▲
Contact Info
FURUNO INS Training Center Denmark
Hammerholmen 44-48, DK-2650 Hvidovre, Denmark
Phone: [phone]
E-mail: [e-mail]
FURUNO INS Training Center Singapore
No. 17, Loyang Lane, Singapore 508917
Phone: [phone]
E-mail: [e-mail]
FURUNO Deutschland GmbH
Siemensstrasse 33
D-25462 Rellingen
Germany
Phone: [phone]
E-mail: [e-mail]
OCEAN TRAINING CENTER
(
Part of ÖZSAY MARINE GROUP
)
Guzelyali Mah., Ankara Asfalti E-5, Üzeri No. 18
TR-34903 Pendik, Istanbul
Turkey
Phone: [phone]
E-mail: [e-mail]
GMC Maritime Training Center
47 Gounari Street
GR- 185 31 Piraeus
Greece
Phone: [phone]
E-mail: [e-mail]
Click
>>>
to open
Click
<<<
to retract
1
MFD operating mode selector
1
Items on the lower part of the InstantAccess bar:
3
Other buttons on the Status bar
Click to enter Man Overboard mark on the chart.
Click to take a screenshot.
Click to undo/redo the past actions.
By clicking this button, the MFD
operating mode selector will open.
2
Operation Mode
These three buttons give quick access
to the three ECDIS operation modes:
“Monitor mode”, “Chart Maintenance
mode” and “Plan mode”. Once an
operation mode is selected, the upper
part of the InstantAccess bar will
change accordingly, providing quick
access to the tasks specific to each of
the ECDIS operation modes.
Click to play back log.
Shows only the chart,
while long-pressed by the
left-click key.
Click to restore the IMO
standard display.
Click to set priority order of
chart to be displayed.
Click to select IMO chart
display setting: IMO BASE,
IMO STD or IMO-ALL.
Click to display the
operator’s manual, ECDIS
program number and
system information.
Click to select, manage and
set the user profile.
Status bar
InstantAccess bar
When clicking on the InstantAccess bar, the InstantAccess bar will retract to the edge of the screen.
By clicking the hidden bar at the edge of the screen, the InstantAccess bar will come back in.
The upper part of the InstantAccess bar contains the list of available tasks/functions specic to each of the ECDIS
operation modes selected, hence providing quick access to the needed tasks/functions to be performed. While the
menu items of the upper part of the InstantAccess bar change according to the mode selected, the lower part of the
InstantAccess bar is static for all modes, except for “Mini Conning”, which is only available in the “Monitor mode”
and “Plan mode”.
Click to display Admiralty Information Overlay.
Click to show and hide the mini conning display, only
available in the “Monitor mode” and “Plan mode”.
Click to view various data about the chart
currently displayed, the contents of which
depend upon the type of chart displayed.
Click to view overview of ECDIS
chart symbols.
Click to open a chart viewing date
setup window.
Click to enter setting windows for chart/symbol display as well as chart alert.
Click to split the screen in two (two-way split screen).
Click to activate on-screen keyboard.
Click to record user/position events to the event log as well as to access
various logs to observe, including: navigation logs (details log, voyage log
and chart usage log), target log and alert log.
Click to summon display brilliance level adjustment window where the
brilliance level can be adjusted either manually (by gauge) or
automatically (by clicking the automatic brilliance adjustment button, next
to the brilliance gauge).
Click to select a color palette (color and brilliance set of the screen
presentation) to match the ambient lighting conditions.
31 2
1
426 16.77"
396 15.59"
45 1.77"150 5.9" 150 5.9"
360 14.17"
3-ø8
Fixing hole
15 0.59"
153 6.02"
150 5.9"
no less than 150 5.91" no less than 100 3.94"
42 1.65"
33 1.3"
172 6.77"
153 6.02"
133 4.06"
4-ø5
Fixing hole
324 12.76"
336 12.23"
350 13.79"
220 8.66"
235.5 9.27"
150 5.91"64 2.52"
180 7.09"
4-ø5
Fixing
Hole
48 1.88"
41 1.61"
100 3.94"
60 2.36"
235.5 9.25"
150 5.91" 64 2.51"
4-ø5
Fixing
Hole
48 1.88"
41 1.61"
48 1.88"
41 1.61"
no less than 150 5.91"
100 3.94"
4-ø5
Fixing
Hole
60 2.36"
150 5.91"64 2.52"
235.5 9.25"
48 1.88"
41 1.61"
no less than 150 5.91"
100 3.94"
4-ø5
Fixing
Hole
60 2.36"
150 5.91"64 2.52"
235.5 9.25"
120 4.72"
180 7.09"
no less than 70 2.76"
Max 70
2.76"
170 6.69"
120 4.72"
110 4.33"
180 7.09"
398 15.67"
55
2.17"
388 15.28"
398 15.67"
170 6.69"
180 7.09"
38
1.5"
10 to 20
0.39" to 0.79"
no less than
72 2.83"
339 13.35"32 1.26"
180 7.09"
18 0.71"
216 8.5"