Operator's Manual

FURUNO FMD-3200/3300/3200-BB
SP - 2 E4473S01H-M
2.15 Manual update User selects symbols
2.16 Other functions Radar overlay, Playback log
3 INTELLIGENT HUB (OPTION)
3.1 Number of ports 8 ports (10/100/1000BASE-T)
3.2 Swiching method Store and forward, non-blocking L2 switching
3.3 Capacitance of switching 16 Gbps
3.4 Flow Control Full-Duplex (IEEE802.3x flow-controlled at automatic mode)
3.5 Ring aggregation 8 group max.
3.6 Spanning tree STP(IEEE802.1D), RSTP(IEEE802.1w), MST(IEEE802.1s)
3.7 IGMP snooping IGMP v1, v2, v3
3.8 Operation control PING, SNMPv1, v2c, v3
3.9 VLAN Port-base VLAN, IEEE802.1Q Tag VLAN supported,
VLAN ID：1 to 4094, VLAN registration：128 group
3.10 Multiple VLAN Communication between isolated ports is disabled
3.11 Cast control Broadcast, Multicast suppression
4 INTERFACE
4.4 Serial I/O 7 ports (IEC61162-1/2: 2 ports, IEC61162-1: 5 ports)
Input ABK, ALR, CUR, DBT, DPT, DTM, ETL, GGA, GLL, GNS, HDT,
HTD, MTW, MWV, NRX, OSD, PRC, RMC, ROR, ROT, RPM, RSA,
RSD, THS, TRC, TRD, TTM, VBW, VDM, VDO, VDR, VHW, VTG,
XDR, ZDA
Output ABM, ACK, BBM, DDC, EVE, HTC, OSD, VBW, VSD, XTE
4.5 Digital input 1 channel: contact signal, 100 ohm max. or 24VDC input
4.6 Alarm output 6 channels: contact signal, load current 250 mA
Normal close: 2, Normal open: 2, System fail: 1, Power fail: 1
4.7 DVI output 2 ports: DVI-D (DVI1/2), 1 port: DVI-I or RGB (DVI3)
4.8 USB 4 ports (3 ports for control units)
4.9 LAN 3 ports: Ethernet 1000Base-T for network equipment, sensor
adapter and spare
4.10 Sensor adapter (option)
MC-3000S (serial) 8 ports: I/O, IEC61162-1/2: 4 ports, IEC61162-1: 4 ports
MC-3010A (analog) 3 ports: Input, -10 to +10V, 0 to 10V or 4 to 20mA
MC-3020D (digital-in) 8 ports: relay contact, logics set from program
MC-3030D (digital-out) 8 ports: relay contact, normal open and normal close available
5 POWER SUPPLY
5.1 Monitor unit
MU-190 100-230 VAC: 0.7-0.4 A, 1 phase, 50/60 Hz
MU-231 100-230 VAC: 1.0-0.6 A, 1 phase, 50/60 Hz
HD26T21 MMD-MA4-FAGA 115/230 VAC: 1.1-0.5 A, 1 phase, 50/60 Hz, 24 VDC: 5.2 A
5.2 Processor unit 100-115/220-230 VAC: 1.5-0.7 A, 1 phase, 50/60 Hz