Operator's Manual

APPENDIX 5 ALERT LIST
AP-55
495 Anchor Watch Er-
ror
Warning
While anchor watch alert
function is enabled, ship's
position has been outside
of alarm area centering
certain position for more
than 3 seconds.
Be careful of dragging an-
chor.
526 TT CPA/TCPA Alarm
CPA(Closest Point of
Approach) and TCPA(Time
to CPA) of TT is within the
set range.
Be careful of the risk of
collision with other ships.
527 TT Lost Warning
Target has been not
detected 5 times
successively. Tracked
target is lost.
TT is lost. Check the lost
target.
528 REF Target Lost Warning REF target is lost and can-
not be tracked.
REF target is lost. Check
the lost target.
529 AIS New Target Warning System detected the new
AIS target.
AIS target entered into AZ.
530 AIS Target Display
95%
Caution
95% of maximum number
of target which can be
displayed is used.
The number of AIS target
became 95% of that can be
displayed. Change the
display number using filter
function.
531 AIS Target Display
100%
Warning
100% of maximum number
of target which can be
displayed is used.
The number of AIS target
became 100% of that can
be displayed. Change the
display number using filter
function.
532 AIS Target Capaci-
ty 95%
Caution
95% of memory capacity for
AIS targets is filled.
Memory for AIS targets is
filled 95%. Cancel
unnecessary targets.
533 AIS Target Capaci-
ty 100%
Warning
100% of memory capacity
for AIS targets is filled.
Memory for AIS targets is
filled 100%. Cancel
unnecessary targets.
534 AIS Target Activate
95%
Caution 95% of capacity for active
AIS is used.
The number of active AIS
target became 95% of its
limit. Change the
unnecessary targets to
sleep mode.
535 AIS Target Activate
100%
Warning 100% of capacity for active
AIS is used.
The number of active AIS
target became 100% of its
limit. Change the
unnecessary targets to
sleep mode.
536 AIS CPA/TCPA Alarm
CPA and TCPA of AIS
activating target is below
the value set in menu.
Be careful of the risk of
collision with other ships.
No. Text Default Meaning Remedy